Can we do the bending for 201 Stainless steel tube

The incident occurred last month, the manager of the 201 stainless steel pipe manufacturer Hong Yue Stainless Steel, manager Yang, received a customer of 201 stainless steel pipe 60 pipe. The customer said that he had tried several stainless steel pipes in the market and could not bend them. However, after the test, only the pipes with the likes were available, and the result was a stainless steel pipe.


Why did you look at several stainless steel pipe products and finally choose HONG YUE? This case actually shows the quality of Hong Yue Stainless Steel pipe. HONG YUE 201 stainless steel products, even 60 large tubes can also be rounded, indicating that the toughness of HONG YUE 201 material is good. The quality of 201 material toughness is actually related to the following three factors:

1.201 steel belt pros and cons. Stainless steel pipe steel belt is good or bad. The stainless steel pipe made with stainless steel belt of refining furnace has stable material properties. For the Hong Yue Stainless Steel refining furnace strip, the chromium content is 13.5-14.8%, and the nickel is 1.01-1.28%. The content of the two is not only higher than that of the recycled material, but also the property is more stable and the toughness of the pipe is good. The content of copper in 

2.In fact, many of the 201 materials are copper-free, but adding copper as a metal element not only increases the brightness of the tube, but also improves the toughness of the tube. Therefore, this is also HONG YUE 201 stainless steel pipe, even for the 60 pipe, it can meet the important reasons for customers' rounding processing needs. 

3. Carbon content. In Stainless steel tubes, carbon is often present as an impurity. However, adding carbon to the stainless steel material can increase the hardness of the stainless steel pipe; on the contrary, the hardness of the steel strip will also decrease, so some customers have reported why the HONG YUE 201 pipe is softer. It is better toughness.