Welcome: HongYue Stainless Steel
Language: Chinese ∷  English

Industry News

Stainless steel inner polishing - Stainless steel electronic poishing

Vertical drilling or rocker drilling can be used for honing. Honing is a honing head that is honed by a honing head. The structure of the honing head is cylindrical. 


There are several grooves on the circumference of the horn. The honing machine can use a honing machine to polish the inner hole of the tube. A pressure spring is mounted on the bottom Surface of the groove. During honing, the compression spring pushes the oil stone to the inner wall of the circular tube, and the honing machine drives the shank of the honing head to rotate up and down to polish the inner wall of the tube. 


In general, the honing machine has a much larger stroke than the vertical or radial drilling, and a honing machine can be used to process longer tubes. Vertical drills or radial drills can only process relatively short tubes. The precision of honing can reach 0.01mm. Chemical polishing can only polish tubes that are inherently smooth on the inner wall. Pipes with poor inner wall roughness are not suitable.